A female locking connector designed to be used with the C-10 Locking Connector for special applications. The female contacts are embedded in epoxy for a hermetic seal.

	S-30 SMLFC For use in the hub of an FMC Steritort for connection of Rotary Contactors.
	S-31 SMLFC This is the S-30 listed above with a 52” (1.3 meters) length of wire attached. With the wire attached, this is ready for installation in the FMC Steritort.
	S-32 SMLFC This is identical to the S-30 listed above but comes with a separate nut. These may be used for constructing a thermocouple connector panel inside a retort. Not recommended for use through a retort wall.
	S-33 SMLFC This is identical to the S-31 listed above; the customer must indicate the length of wire that is to be attached. There is an additional charge for the wire.
	S-34 Protective Cap A protective cap for items S-30, S-31, S-32, and S-33 when they are not in service.